Professor
Department of Mechanical Engineering
Room 61D3, Eng. Bldg. #2
Tel. +81-3-5841-6411
Fax. +81-3-5802-8858
E-mail: ysuzuki@mesl.t.u-tokyo.ac.jp
| 1993 | Dr. Eng., Mechanical Engineering, The University of Tokyo |
| 1993-1994 | Research Associate, The University of Tokyo |
| 1994-1995 | Assistant Professor, Nagoya Institute of Technology |
| 1995-1999 | Assistant Professor, The University of Tokyo |
| 1999-2010 | Associate Professor, The University of Tokyo |
| 2001-2002 | Visiting Research Associate, California Institute of Technology |
| 2010- | Professor, The University of Tokyo |
Steering Committee Member, IEEE MEMS Conference (2007-)
Editorial Board Member, Journal of Micromechanics and Microengineering (2010-)
General Co-chair, IEEE MEMS2010 (Hong Kong)
Technical Committee Member, IEEE Nanotechnology Council (2009-)
Technical Program Committee Member, International Conference on Micro Electro Mechanical Systems (IEEE MEMS)（2005, 2006, 2008-)
Program Committee Member, International Conference on Solid-state Sensors, Actuators and Microsystems (Transducers) (2009-)
Program Committee Member, International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (Power MEMS)（2003-）
Fan, Y., Suzuki, Y., and Kasagi, N., 2009, "Experimental Study of Micro-scale Premixed Flame in Quartz Channels," Proc. Comb. Inst., Vol. 32, Issue 2, pp. 3083-3090.
Kamijo, T., Suzuki, Y., Kasagi, N., and Okamasa, T., 2009, "High-temperature Micro Catalytic Combustor with Pd/Nano-porous Alumina," Proc. Comb. Inst., Vol. 32, Issue 2, pp. 3019-3026.
Kasagi, N., Suzuki, Y., and Fukagata, K., 2009, "Microelectromechanical Systems-Based Feedback Control of Turbulence for Skin Friction Reduction," Annu. Rev. Fluid Mech., Vol. 41, pp. 231-251.
Nishimura, T., Miwa, J., Suzuki, Y., and Kasagi, N., 2009, "Label-free Continuous Cell Sorter with Specifically Adhesive Oblique Micro-grooves,"
J. Micromech. Microeng., Vol. 19, No. 12, 125002, 10pp.
Sakane, Y., Suzuki, Y., and Kasagi, N., 2008, "Development of High-performance Perfluorinated Polymer Electret and Its Application to Micro Power Generation," J. Micromech. Microeng., Vol. 18, No. 10, 104011, 6pp.
Morimoto, K., Suzuki, Y., and Kasagi, N., 2008, "High Performance Recuperator With Oblique Wavy Walls," Trans. ASME: J. Heat Transfer, Vol. 130, Issue 10, 101801, 10pp.
Miwa, J., Suzuki, Y., and Kasagi, N., 2008, "Adhesion-Based Cell Sorter With Antibody-Coated Amino-Functionalized-Parylene Surface," J. Microelectromech. Syst., Vol. 17, No. 3, pp. 611-622.
Pimpin, A., Suzuki, Y., and Kasagi, N., 2007, "Micro Electrostrictive Actuator with Metal Compliant Electordes for Flow Control Applications," J. Microelectromech. Syst., Vol. 16, No. 3, pp. 753-764.
Suzuki, Y., and Tai, Y.-C., 2006, "Micromachined High-Aspect-Ratio Parylene Spring and Its Application to Low-frequency Accelerometers," J. Microelectromech. Syst., Vol. 15, No. 5, pp. 1364-1370.
Angele, K. P., Suzuki, Y., Miwa, J., and Kasagi, N., 2006, "Development of High-Speed Micro Scanning PIV Using a Rotating Disk,"Meas. Sci. Tech, Vol. 17, No. 7, pp. 1639-1646. (PDF 920 kbytes)
Kurimoto, N., Suzuki, Y., and Kasagi, N., 2005, "Active Control of Lifted Diffusion Flames with Arrayed Micro Actuators," Exp. Fluids, Vol. 39, No. 6, pp. 995-1008.
Return to THT Laboratory homepage (revised February 22, 2010)